A laser-assisted deep-cleansing treatment that uses a liquid carbon lotion and Q-switched Nd:YAG laser energy to purge pores, control excess oil, refine skin texture, and deliver an instant, lasting glow — all with zero downtime.
A Carbon Facial — also widely referred to as a Carbon Laser Peel or Hollywood Peel — is an advanced laser-assisted skin treatment that combines the deep absorptive properties of liquid carbon with the precision of a Q-switched Nd:YAG laser. The result is a comprehensive, highly effective skin-cleansing and rejuvenation treatment delivered in a single comfortable session with no recovery time required.
The treatment works in two phases. In the first phase, a thin layer of liquid carbon lotion is applied across the skin. Carbon particles are naturally attracted to sebum, dead cells, and debris, and they penetrate deep into the pores, effectively binding to impurities inside them. In the second phase, a Q-switched Nd:YAG laser is passed over the skin. The carbon particles absorb this laser energy intensely, causing a rapid vaporisation that simultaneously destroys the carbon — along with everything it has bonded to inside the pores — and delivers a controlled amount of energy into the skin to stimulate collagen and improve overall skin quality.
At Radiant Glow in Kondhwa, Pune, Carbon Facial treatments are performed by a qualified cosmetologist using properly calibrated equipment. The laser settings are adjusted based on your skin type, tone, and the specific concern being addressed to ensure both safety and effectiveness.
This is not a surface-only treatment. The combination of carbon’s pore penetration and laser energy produces results that are meaningful, visible, and immediate — with most clients describing noticeably cleaner, brighter, and smoother skin immediately after their session.
The Carbon Facial works in four interconnected stages. Each stage builds on the previous one to deliver comprehensive cleansing, stimulation, and visible skin improvement in a single session.
Liquid carbon lotion is applied evenly across the treatment area. The carbon particles penetrate deep into the pores, where they bond to sebum, dead cells, bacteria, and accumulated debris — preparing the skin for the next stage.
The first laser pass vaporises the carbon on the skin’s surface, removing the topmost layer of dead cells and impurities with precision. This delivers an immediate exfoliation effect, improving skin texture and clarity at the surface level.
The second laser pass targets the carbon inside the pores. The rapid vaporisation clears the pores of trapped sebum, blackheads, and congestion that standard cleansing cannot reach — leaving pores significantly cleaner and visibly refined.
The controlled laser energy absorbed by the skin stimulates the natural production of collagen in the deeper dermis. This supports improved skin firmness, elasticity, and overall quality over time — with cumulative benefits building through a course of sessions.
The Carbon Facial delivers a combination of benefits that span from immediate visible improvements to progressive, longer-term skin quality enhancement — all within a single, comfortable treatment session.
The combination of surface exfoliation and deep pore cleansing delivers an immediate brightening effect. Most clients notice a visible luminosity and freshness in their skin immediately after the session — which is why Carbon Facial is often called the Hollywood Peel.
The laser energy targets and shrinks overactive sebaceous glands, helping to reduce the production of excess sebum. This makes Carbon Facial particularly beneficial for individuals with oily or combination skin who struggle with persistent shine and congestion.
Carbon particles penetrate into the pores, where they bind to trapped sebum, blackheads, and impurities. The laser vaporisation removes all of this from inside the pore, achieving a depth of cleansing that no topical product or manual extraction can replicate.
The exfoliation effect of the first laser pass removes the accumulation of dead skin cells from the surface, leaving the skin feeling noticeably smoother, looking more refined, and reflecting light more evenly after the session.
By clearing congestion from inside the pores and delivering controlled laser energy that tightens the surrounding skin, Carbon Facial can significantly reduce the visible size of enlarged pores — contributing to a cleaner, more refined skin surface.
The controlled laser energy delivered into the dermis stimulates the skin’s natural collagen production over time. A course of Carbon Facials can contribute to improved skin firmness, reduced fine lines, and a progressively more youthful-looking skin quality.
The laser energy delivered during a Carbon Facial has a natural anti-bacterial effect on the skin, which can help reduce the presence of acne-causing bacteria and contribute to a reduction in breakouts over a course of treatments.
Carbon Facial typically requires no recovery time. Mild redness, if it occurs at all, generally resolves within a few hours. Most clients resume their regular activities — and can apply make-up — immediately after their session.
While a single Carbon Facial delivers immediately visible results, a planned course of sessions produces compounding benefits — particularly in the areas of oil control, pore refinement, skin texture, and collagen quality — that improve progressively over time.
At Radiant Glow in Kondhwa, Pune, every Carbon Facial session is preceded by a proper skin assessment to ensure the treatment is appropriate and the laser settings are correctly calibrated for your skin type and tone. This is not a one-size-fits-all procedure.
The treatment is performed in a controlled clinical environment. Eye protection is provided and worn throughout the laser portion of the session as a standard safety measure. The overall experience is generally comfortable, with most clients describing a mild warming or prickling sensation during the laser passes.
A typical Carbon Facial session at Radiant Glow takes approximately 30 to 45 minutes from start to finish, making it easy to incorporate into a regular routine without disrupting the day.
The cosmetologist assesses your skin type, tone, and current concerns. The laser settings are calibrated based on this assessment to ensure the treatment is safe, appropriate, and targeted for your individual skin.
The treatment area is thoroughly cleansed to remove make-up, sunscreen, and surface impurities. Clean skin ensures the carbon lotion makes direct contact with the pores and the laser energy is delivered uniformly across the treatment area.
A thin, even layer of liquid carbon lotion is applied to the treatment area and allowed to sit on the skin for a few minutes. During this time the carbon particles penetrate into the pores, binding to sebum, dead cells, and impurities inside.
The Q-switched Nd:YAG laser is passed over the skin at the appropriate setting. This first pass vaporises the carbon on the skin’s surface, removing dead cells and providing a clean, precise exfoliation without any physical abrasion.
The second laser pass targets the carbon inside the pores at a higher fluence. This clears the pore contents through vaporisation and simultaneously delivers energy to the dermis to stimulate collagen production and shrink overactive sebaceous glands.
The session concludes with the application of appropriate soothing and protective products, followed by broad-spectrum sunscreen. You will receive specific aftercare instructions before leaving the clinic to ensure the best possible outcome.
Carbon Facial is particularly well-suited for oily, congested, and acne-prone skin, but its benefits extend to a wide range of skin concerns. The treatment is versatile and consistently produces visible results across different skin types.
At Radiant Glow, the cosmetologist ensures the treatment is tailored to your specific skin profile — adjusting the laser settings and post-treatment protocol based on your individual needs and goals.
Carbon Facial is a versatile treatment suitable for a wide range of clients. However, it is most sought after by those dealing with oily, congested, or acne-prone skin — and by those who want visible results without any downtime.
Carbon Facial is one of the most effective treatments available for managing excess oil production. The laser energy targets overactive sebaceous glands, helping to reduce sebum output and the persistent shine associated with oily and combination skin over time.
The deep pore cleansing and anti-bacterial action of Carbon Facial makes it well-suited for clients dealing with recurring breakouts, persistent blackheads, or congested pores that regular skincare and topical products have been unable to manage effectively.
The instant glow and zero downtime of Carbon Facial make it an excellent choice for pre-event skin preparation. It can be scheduled close to a wedding, party, or professional occasion with no risk of recovery-related side effects on the day.
The collagen stimulation effect of the Carbon Facial’s laser energy makes it a useful inclusion in an anti-ageing skin maintenance programme for clients concerned about early fine lines, reduced elasticity, or general loss of skin quality over time.
For clients whose primary concern is rough texture, enlarged pores, or dull, flat-looking skin, the surface exfoliation and deep pore refinement of Carbon Facial provides a level of improvement that is difficult to achieve through topical skincare alone.
Carbon Facial works well as a regular skin maintenance treatment. Scheduling sessions every 4 to 6 weeks allows the cumulative benefits — particularly in oil control, pore refinement, and collagen quality — to develop progressively over time.
Before the session: Arrive with a clean face, free of make-up, heavy moisturisers, or active skincare products. Your cosmetologist will assess your skin, confirm the laser settings, and explain what to expect during the treatment. It is advisable to avoid retinol and exfoliating products for 2 to 3 days before your session.
During the session: Eye protection is provided and worn throughout. During the carbon application phase, the treatment is entirely comfortable. During the laser passes, most clients feel a mild warming or very slight prickling sensation as the laser moves across the skin — this is well within the range that most clients find easily manageable.
Immediately after: Your skin will appear cleaner, slightly flushed, and noticeably brighter. The flush typically resolves within 1 to 3 hours. Sunscreen is applied before you leave. The pores will appear visibly cleaner and tighter, and the overall skin tone will have a fresh, even quality.
In the days that follow: The improvement in skin clarity, texture, and radiance continues as the skin responds to the treatment. Oil production is noticeably reduced in the days following the session. With a regular course of treatments, pore size, skin texture, and overall skin quality continue to improve cumulatively.
Carbon Facial is a laser-based treatment where proper equipment calibration and professional expertise are essential. At Radiant Glow in Kondhwa, Pune, every Carbon Facial is performed by a qualified cosmetologist using properly maintained equipment — ensuring safe, effective, and consistent results.
Every Carbon Facial at Radiant Glow is performed by a qualified cosmetologist. Laser settings are calibrated individually for each client based on a proper skin assessment — not applied using a single standard protocol for all.
Proper Q-switched Nd:YAG laser calibration is essential for safe use on Indian skin tones. At Radiant Glow, the cosmetologist is experienced with the skin types and tones common in Pune and understands how to adjust settings for safety and effectiveness.
The effectiveness and safety of Carbon Facial depend significantly on the quality and calibration of the laser equipment used. Radiant Glow uses properly maintained, professional-grade equipment for all laser-based treatments.
At Radiant Glow, the laser settings, number of passes, and post-treatment protocol are all determined based on your individual skin assessment — ensuring every session is targeted, appropriate, and effective for your specific concern.
Before every Carbon Facial session, you will receive a clear, honest discussion of what the treatment can realistically achieve for your skin — including how many sessions are recommended and what the aftercare involves.
Radiant Glow is located at Ultima Business Centre, Kondhwa — easily accessible from Wanowrie, NIBM, Undri, Katraj, Bibwewadi, Hadapsar, and all surrounding South Pune areas. Open Monday to Sunday, 11 AM to 8 PM.
Carbon Facial requires relatively straightforward aftercare compared to more intensive laser treatments. However, following the correct post-treatment guidance helps protect the results and supports the skin’s continued response to the treatment.
Radiant Glow is located in Kondhwa, South Pune — accessible for clients from Wanowrie, Undri, Katraj, NIBM, Bibwewadi, Hadapsar, Mohammadwadi, Pisoli, and all surrounding areas.
If you are looking for a trusted cosmetologist in Kondhwa or a professional Carbon Laser Peel clinic in Pune, Radiant Glow offers a properly assessed, expertly performed Carbon Facial experience.
Shop No 10, Ultima Business Centre, Sai Nagar, Kondhwa, Pune – 411048
Monday – Sunday: 11 AM – 8 PM
Schedule Your ConsultationBook your Carbon Facial consultation at Radiant Glow in Kondhwa, Pune. Our cosmetologist will assess your skin and ensure the treatment is correctly calibrated for your skin type and goals.